How to Make an Acrylic Tub Look New Again

Download Article

Download Commodity

Acrylic tubs are becoming more popular since tub manufacturers can create unique tub shapes. Caring for your acrylic tub is easy as long as y'all employ the right products and treat the tub gently. To gently make clean your acrylic tub, you tin can use natural products similar vinegar, blistering soda and lemon. You can also purchase commercial cleaners designed for acrylic tubs. Remember to clean the tile area above your acrylic tub, then the space will really shine.

1. ane

   Fill the tub with hot water and vinegar. If your acrylic tub is heavily stained or dirty, consider filling the tub with hot water and vinegar. This will assist loosen the dirt and grime before you clean the tub. Fill up the tub with hot h2o and pour in 2 cups (470 mL) of vinegar. Allow it sit for well-nigh 15 minutes and then bleed the tub.^[i]

   • The acid in the vinegar volition help loosen the clay without damaging the acrylic tub.

2. 2

   Sprinkle the tub with baking soda. Sprinkle baking soda all over the tub while it's still wet. If you didn't make full the tub with hot h2o and vinegar, but cascade or spray water along the within and sides of the tub. Let the baking soda sit down on the tub for a few minutes.^[2]

   • The baking soda can clean mold, mildew, and soap scum. It'due south besides gentle to use on the acrylic tub.
   • For a stronger cleanser, you could utilize borax instead of baking soda.

   Advert

3. 3

   Scrub the acrylic tub. Dip a soft cloth or sponge into water and scrub the blistering soda in the tub. The baking soda will grade a bit of a paste equally you lot make clean the tub. Ensure that you're using a non-annoying sponge or y'all may scratch the acrylic tub. Gently scrub the unabridged tub.^[three]

   • Avert using scrubbers or sponges that have a rough side designed for heavy-duty cleaning. Instead, look for a gentle sponge or just utilise a soft material.

4. 4

   Use a toothbrush to scrub corners and edges. If you accept hard to reach edges or places where the tub meets fixtures (similar the faucets), get an onetime toothbrush and scrub the spots. The toothbrush will be gentle enough to remove tough dirt and grime.^[iv]

   • You lot can also apply a long-handled scrub brush, as long every bit the bristles are soft.

5. 5

   Rinse the tub and treat any stains with lemon. Make full a bucket with h2o and pour it over the tub to rinse away the blistering soda and dirt. Continue rinsing until the tub is clean. If you notice stains, rub half of a lemon over the stains until they lift. Rinse the stains with water and wipe them dry with a soft cloth.^[5]

   • Lemon works well for removing difficult-h2o deposits.

   Advertisement

1. 1

   Wash the tub with a mild cleanser. Choose a safety and gentle cleanser to make clean your tub out. This volition prevent clay and grime from building up. Merely wet a soft cloth or sponge with antibacterial dish soap and use it to scrub the entire tub. Rinse the tub to completely remove the dirt and soap.

   • You lot can use a mild antibacterial soap that yous'd utilize for hand washing your dishes. This is gentle enough to regularly utilise on your acrylic tub.

2. 2

   Choose a safe deep-cleaning commercial product. You lot should deep clean your acrylic tub occasionally, especially if you notice hard-water deposits or grime that's hard to wash away with soap and water. Read labels to find a tub cleaner that'southward safe to use on acrylic. You can also check with your tub manufacturer for a list of approved commercial cleaners to utilize on the tub.^[6]

   • Most tub manufacturers update their canonical cleaner list every few years, so ensure that you discover the most recent list available.

3. 3

   Scrub and rinse the tub. Well-nigh commercial cleaning products will have you spray the product. Go along the bottle about 4–vi inches (10–15 cm) from the tub as you spray. Let the cleaner sit on the tub for 30 seconds to a few minutes. Rinse the cleanser off and wipe the tub dry with a soft material.

   • Always follow the manufacturer's instructions for cleaning the tub.

4. 4

   Avoid annoying cleaners. Acrylic tubs can scratch easily, even from chemical cleaners. This is why it'southward of import to avert using droplets cleaners that come in cans or solvents (like acetone). You should besides avoid using abrasive sponges that tin can scratch or impairment the acrylic tub.^[7]

   • If you're unsure if a product is safe to use, simply use information technology if it says it'south rubber to utilise on acrylic surfaces.

   Advertisement

1. 1

   Make clean the tub out weekly. Go in the habit of washing downwards the tub with a mild soapy cleanser and water every week. This volition prevent clay and grime from building up which would take longer to remove.^[8]

   • Regular washing will besides keep stains from forming in the acrylic tub and tile near the tub.

2. 2

   Avert using rough sponges and cloths. Don't clean your acrylic tub with materials that tin can scratch the surface. Never use abrasive scrubbing pads or sponges. You should too avoid using steel wool which will also damage the surface.^[nine]

   • Instead, utilize soft cloths and sponges. For case, you could utilise a microfiber or terry material towel.

3. 3

   Rinse the drains thoroughly. You may need to utilize a bleed cleaner or tub clog remover every one time in a while. If y'all practice pour this downwards your tub's bleed, yous'll need to rinse it away completely, so there's no cleaner or remover left continuing in the bleed area.^[10]

   • If you exit cleanser or clog remover in the bleed area, information technology could impairment the acrylic surface.

4. 4

   Avoid smoking effectually the tub. To avoid discoloring the tub, nigh acrylic tub manufacturers recommend that you never smoke in or effectually it. This is because tobacco smoke can permanently impairment the tub.^[eleven]

   Advert

Add together New Question

• Question

  How practise I clean tough water stains from around the jets in my Acrylic whirlpool tub? I have tried using a vinegar and blistering soda paste simply the water stains remain under the jets.

  

  Michelle Driscoll is the Possessor of Mulberry Maids based in northern Colorado. Driscoll received her Masters in Public Wellness from the Colorado School of Public Wellness in 2016.

  

  Founder, Mulberry Maids

  Expert Reply

• Question

  I take mold spots between the border molding and the acrylic tub. I scrubbed them with vinegar and baking soda and a toothbrush, but some remain. What should I do?

  

  Michelle Driscoll is the Possessor of Mulberry Maids based in northern Colorado. Driscoll received her Masters in Public Health from the Colorado School of Public Wellness in 2016.

  

  Founder, Mulberry Maids

  Expert Respond

• Question

  My acrylic tub is yellowing. How do I get it white once again?

  

  Have you tried the vinegar and baking soda mentioned in the starting time? If that doesn't piece of work, y'all could try using them together, just dilute the vinegar with water first in the tub, then add the baking soda. They will foam like crazy, just are very effective for yellow stains. Mixed in a bucket, they will accept difficult scum off of shower doors, too.

• Question

  How do I remove a stain from an acrylic whirlpool tub?

  

  Soak one or more cleaning rags in white vinegar. And so drape or wrap the rag around the expanse afflicted by mineral deposits. Get out the rags for an hour or more, calculation more vinegar if necessary to keep the rags wet. When the mineral deposits take loosened up or dissolved, remove the rags and make clean the expanse with a make clean towel or sponge.

Ask a Question

200 characters left

Include your email accost to get a message when this question is answered.

Submit

Advertising

Things You'll Need

• Commercial cleaner
• Bucket
• Toothbrush
• Bleach
• Baking soda
• Vinegar
• Lemon
• Soft sponge
• Gloves

About This Article

Article Summary X

To make clean an acrylic tub with natural products, start by filling the tub with hot water and vinegar. After 15 minutes, drain the tub and sprinkle it with baking soda while information technology'due south still wet. Let the baking soda sit for a few minutes, and so apply a soft fabric or sponge to gently scrub the tub. When y'all're done scrubbing, rinse the tub with h2o. If you discover any lingering stains, rub half a lemon on them until they elevator and and then rinse the area with h2o. To learn how to use commercial products on an acrylic tub without damaging the surface, go on reading!

Did this summary aid you?

Thanks to all authors for creating a page that has been read 144,831 times.

Did this commodity help you?

chessonoctaires.blogspot.com

Source: https://www.wikihow.com/Clean-an-Acrylic-Tub#:~:text=To%20clean%20an%20acrylic%20tub%20with%20natural%20products%2C%20start%20by,to%20gently%20scrub%20the%20tub.

Share this post